Now available - OEM Euro style 3D printed from durable ABS plastic tail lamp housings! Both left and right lamp housings included. The 911R used a fiberglass taillight base plate with Euro lights mounted to them to reduce the weight of the vehicle. Many people don't like the look but want the weight savings, along with improved lighting. WEIGHT IS ONLY 0.800 LBS!
That's WITH the bulbs. 911R lamps are around 1.200 lbs. They use 3157 LED bulbs and twist lock sockets INCLUDED! Amber for turn, Red for brake, bright white for reverse.
Please let me know if you want different bulbs! WHEN ORDERING: Please specify AMBER or RED turn signal bulbs. If you need lenses, please contact me. These do not have the "marker lamps", just like the Euro / Rest of world cars.
They bolt right up and fit like factory with new hardware for installation. Use any OEM shape lens. Use OEM gasket or run without (LEDS are mostly waterproof and don't get hot). If you are running a NEW gasket, you may need to trim the gasket in some areas (usually behind the front corner) for a nice fit. The new gaskets (especially aftermarket) are quite a bit thicker.
Take your time and will with come out very nice! With green/red/black brake lamp socket. With blue/red/black brake lamp socket.
Check out how bright the reverse lights are! Save weight off the rear of the car and add brighter lighting with this taillight set.The set comes complete with bulbs and bases ready install or paint if you like. Please contact me directly if you have any concerns with fitment or installation so I may help you. The new gaskets must be glued on (I use clear weather strip adhesive) carefully and properly.
Some of the aftermarket / reproduction gaskets are thicker than the originals. This can push the lens out a bit in the corners. I carefully trimmed the gasket and was able to get a perfect fit. The housings are designed and tested on a perfect, never painted or damaged 911. Your car may need some adjustments to get the fit 100%.
This is very common on 911s.... My personal car had been rear ended in the past and painted who knows how many times. Needless to say it took a bit of careful work to get them just right. You may consider running some heat / spray shielding on the bottom of the housings, especially on a turbo or track car.
My car is turbocharged and I haven't had any issues with no shielding, but I also have an inconel shield around the hotside of my turbo. Your satisfaction is my priority. Please let me know if you need anything at all. And, if you're happy, please write a review!I do have some other products as well. EFI electronic (drive by wire) ITB kit. 997 e throttle mount system.
Heater pipe block off plates. And some motec engine management integration parts. Please note, all products require careful, professional installation.Some minor modifications may be required. If you need assistance with installation or are looking for more parts not currently listed, please send a message. Many components are special order and may not be eligible for return. Please check for lead times and additional details. Porsche 911 (70-88) Tail Light lamp Housing SET!
LED Bulbs lightweight" is in sale since Wednesday, July 29, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Lighting & Lamps\Tail Light Assemblies".design" and is located in Santa Cruz, California. This item can be shipped worldwide.